Rolling Racks Container Store

Affiliate links are used in this article

These rolling racks. from the Container Store changed my kitchen’s life!

We were having a very hard time getting our pots and pans in and out of the drawers and cabinets in our kitchen. I decided to get the chrome rolling rack system that is from the Container’s Store.

Here is step by step how we got organized:

This is where I started! Pull everything out!

Measure! Measure! That was the key for me. I measured the depth, width and height of my cabinets to ensure the rolling racks I shopped for what would fit. *Another tip – if you purchase the 20″ inches rolling rack, ensure your cabinet width is at least 23″ inches wide. You need a little wiggle room so that your doors still close etc.
Took everything out to see what I had. I also gave away older cookware etc.
Whichever rack you purchase make sure the unit is 2″ inches away from the tip of where the cabinets begins.
I purchased contact paper to go down on the bottom of the cabinet but you can also use simple grip prints.
After lay your rack inside the cabinet and pull the rack completely out. There are holes visible where the screws will go.
Ensure you use a black marker and put a dot within the hole where the screw will go into.
After that use an electric screwdriver to install the 4 screw to install the rolling rack.
And you are done! Literally. done.